Pocket watch in a practical function into the twentieth century has been gradually replaced by a more compact watch, watch technology also transferred to the continued development of the watch. Thus, when people today re-interpretation of this timepiece watch patterns, with the new technology as a watch technical support, there is more space and adequate margin, including art or focus on other aspects of the performance, showing even better in the past, artistic value, which is the contemporary watch charm.
As with any mechanical device, pocket watches can encounter issues that cause it to operate incorrectly, or not operate at all. Below are common symptoms of broken watches and logical remedies to get your watch running again.
My Pocket Watch is “Overwound”
This is a common misconception. It is certainly not healthy for the Pocket Watches Review watch to be forced beyond the natural winding point, but pocket watch movements cannot be overwound. This behavior is usually a symptom of other problems. If you find that your watch can wind, or has been fully wound, and it does not tick, please check the other common problems contained on this page.
best watch reviews in www.bestfixwatch.biz.
Symptom: Pocket Watch Winds Fully, Ticks, But Then Stops
Possible Causes:
1.Movement Needs Servicing
Over time, the pivot points can become gummy and the watch can seize up as a result. The movement may require cleaning and oiling by a knowledgable watchmaker or jewelry shop.
2.Broken or Shattered Jewels
Sometimes, jewels will remain in place even when they are broken. This can allow the watch to run for a while before stopping. The problem jewel will need to be replaced by a watchmaker.
Symptom: Pocket Watch Winds Fully, But Does Not Tick
Possible Causes:
1.If the balance wheel swings freely when encouraged:
Movement Needs Servicing
Over time, the pivot points can become gummy and the watch can seize up as a result. The movement may require cleaning and oiling by a knowledgable watchmaker or jewelry shop.
Broken or Missing Impulse Jewel
The balance is not engaging the pallet fork properly, and the impulse jewel will need to be replaced.
Broken or Missing Pallet Jewel
The escapement cannot engage the pallet fork properly, and the pallet jewels will need to be replaced or a new pallet fork fitted.
Bent Gears or Pinions
If there is an issue with the gear train, the movement will become seized. The train should be tested for faults and replacements to gears/pinions as needed.
Broken or Shattered Jewels
The problem jewel will need to be replaced by a watchmaker.
2.If the balance wheel does not swing freely when encouraged：
Broken Balance Staff
A new staff will be required.
Bent or Damaged Hairspring
A new hairspring will be required.
Missing or Disengaged Hairspring Stud
The hairspring will need to be reattached to the regulator properly.
Broken or Shattered Jewels
The problem jewel will need to be replaced by a watchmaker.
Symptom: Pocket Watch Does Not Wind Fully
Possible Causes:
1. Broken Winding Mechanism
A watchmaker will be able to diagnose and correct the problem.
2. Broken Mainspring
If you find that there is a slight resistance when winding and the watch quietly “clicks” or “pops” every so often, seemingly releasing the slight tension, the mainspring is likely broken and will need to be replaced.
You can try.