Watches Mix Into The Water , Fast Processing Method

Watches Mix Into The Water , Fast Processing Method

Life, probably because many of our carelessness led to the beloved watch water. When the watch is water when the accident occurred, if there is a slight mist in the mirror with hot air drying can, if the situation is more serious, how can we do it? Explained below under the watch into the water treatment process.
Watches Mix Into The Water , Fast Processing Method
Method One: silica gel drying agent stars

Accidentally flooded inside the case, can be called silica particulate matter and water have been put together to watch a closed container, a few hours later, remove the watch, water is all gone. This method is simple and economical, accuracy and life on watch were not any damage. Has repeatedly silica gel after absorbing water, can be dried for several hours, water absorption capacity can be regenerated at 120 deg.] C, it can be used repeatedly.

Method two: hot grilled bulb

If the water is not serious, but there is an inner glass layer of mist, then several layers of toilet paper can be used or hygroscopic flannel table package Yan, baking in 40-watt light bulb from 15 cm to about 30 minutes, you can eliminate moisture . Avoid the watch list Mongolia near the fire directly baking sheet so as not to suffer thermal deformation.

Method three: anti-wear watches

The small piece of gauze can be directly used calcium chloride (Fig. 1) wrap; and then come up with a handle-table cover, will be used gauze wrapped calcium chloride and electronic form into a sealed plastic bag and box. After waiting for a long time to watch out, we can see that the water vapor electronic timepiece disappear. If more serious watch water can be placed one day.

Four: Get table stores Cayou

Three methods described above can not remove moisture, should be immediately sent to the watch shop Oil it clear the movement of moisture to avoid rusting parts.

Watch repair water: For water watches the only better way: open the back cover is to watch, the movement of the table to be processed, and then to each movement parts oiled. So watch the water, the movement of the parts to make the table of stained water, causing parts to rust damage. So, watch the water service, not only to clear the steam table, but also for the movement inside the watch to do maintenance to prevent rusting parts hazards.

Watches into the water treatment process are aware of it, usually still a little careful, try not to let the beloved watch fell into water.