When the watch is dirty, the cleaning watch watch is the choice of general cleaning tool or choose watches cleaning machine is open table or machine washing machine cleaning, cleaning watch should be based on each unit’s condition, repair of the table, the movement structure and other factors determine. Cleaning of watch parts in the repair of the table is a very important part, if parts cleaning without a net, not only will affect the normal operation of the machine table, and will affect the long term stability when walking, it should attract attention.

Watch cleaning step

1. General watch cleaning tools, Hand tools include watches brushes and cleaning fluid. Ordinary cleaning tool is very simple, the choice of cleaning solution is 120 aviation gasoline. Because there is a certain amount of impurities in the gasoline, it is best to use when 120 petrol filter paper filter to remove impurities. Otherwise, use unfiltered gasoline cleaning parts surface layer of white frost appears. The parts must be dry cleaned or dried. If the movement more or dirty parts sludge, soak for a while should be placed inside the cylinder. When necessary to use a brush to remove the dirt or sludge with willow sticks, and then placed in clean gasoline cleaning. In short parts cleaning movement should have clean, clean, negligently.

2. Wash with washing machine watch tools. Washing machine parts with high cleaning efficiency. Cleaning liquid gasoline, alcohol and trichlorethylene (F 10:13), etc. added. Three arrested trifluoroacetic cleaning solution with a splint. Common washing machine repair table is the watch-type washing machine, which has a speed control, time control, and elevating the work head reversing function. It also has three bottles containing cleaning fluid, when finished cleaning watch was covered to prevent evaporation of the solution and pollution. There is also an empty bucket for cleaning watch with drying. The first bottle is not a clean solution containing a second bottle containing a solution of the third bottle is clean, distilled water, cleaning dehydration. Of course, you can make other arrangements according to the process. Copper wire mesh box parts cleaning in order to avoid damage due to collision, applications with different shapes in different parts of placing these boxes together and use framework will fit together these boxes membership cleaning, you can wash a few watches.
?
Watch cleaning and maintenance tips

1. Watch the outer box should not lose
Upon receipt of a beloved watch, removed the outside of the package, do not easily throw away the protective watch box. These protective hard shell save watch box, you can give when you do not wear watches usually the safest protection against collision or watch is broken, save the box so reservations are absolutely necessary, but recommended that normally do not wear watches when the habit into the box, can greatly reduce the chances of damage to the watch.
?

2. In addition to the influx of French watches
Ordinary mechanical watches by the tide, use a dry cotton wool on your watch, then 40-watt light bulb bake for 5 minutes, exterior moisture can all be evaporated.
If the quartz electronic watches by the tide, it is desirable small pieces of calcium chloride, with gauze wrap; and then open the cover electronic form, will be wrapped together into calcium chloride and electronic form an airtight plastic bag or glass bottle, sealed. Usually three hours or so can be in addition to wave, the electronic table back to normal. For serious damp moisture absorption time table may be extended.
?

3. Watch the removal of dirt
If the list is not waterproof dirty, you can use a soft toothbrush to brush lightly stains; and waterproof list can use a mild detergent mixed with water scrub, and then a soft cloth to wipe; double canvas or rubber band can also do the same, However, if the dirt has infiltrated the inner layer of the material, and then not be able to deal with chemical cleaning agents, to avoid deterioration.
Motorcycle exhaust gas easily lead to fading, peeling and other gold-plated case, air dust, sweat, rain, dirt and other body will also watch dirty, especially the part of the gold-plated watch, if leather watches, belts will cause mildew, odor and even rupture, so the best after each wearing the watch (especially in the hot summer), wipe with a soft cloth.
?

4. waterproof watch protection
Usually when you do not wear, try not to let damp table, in order to avoid leather deformation; magnetic materials in the vicinity will also affect the accuracy of the watch. In addition, even the water table should avoid soaking the watch, and watch as long as there are blisters (except diving table), the best approach is to check something, so as to avoid delays caused serious damage to the internal parts of the movement. In fact, the water level of the water table, it will harden as the water laps and change, so the timely replacement of water cycle is necessary.
Hot and humid weather, it is easy to watch internal oil condensation generated when walking stop, slow or stop the phenomenon of points, and will cause hardening waterproof ring, reducing waterproof function. Of particular note is that the water contains salt, the metal components are corrosive, so after engaging in outdoor activities, should also be rinsed with fresh water watch case, in order to avoid corrosion.
?

5. Watch the warranty period
After six months warranty repair mechanical watches, quartz watches warranty for three months, one month warranty liquid crystal display, clock winding warranty for 14 days. Counting from the date of pickup. As found in the warranty period shut down, travel is not accurate, free rehabilitation, rehabilitation time warranty period deducted.